Daedelus66 notes that these settings work when using a DM9 in a Taranis (and presumably other {er,open}{9x,tx} radios):
- polarity set to +, rather than the default - (which works with the Orange module).
- preferable but not required to set PPM to 400u instead of the default 300u. ensures neutral remains at 1.5ms -- if left on 300u it will be significantly shifted and require recentering servos.
- DM9 uses only the three basic pins: signal #1, positive #3, and ground #4. Pins 2 and 5 are unused, so no problem there.
- model match not supported.
- rebind by holding the module button while powering up.
