Hobby-RC s
Home
You are Here »
Home
»
_toc:Ladybird
,
Shield
» Ladybird Prop Bumper
0
Ladybird Prop Bumper
RCG user phoxache made a nice
prop bumper
. Cut from 6mm Depron, very nicely done!
◄ Newer Post
Older Post ►
Popular Posts
HobbyKing PUMQ Notes
Got the PUMQ (Pocket Ultra Micro Quad) put together and flashed. Here's some notes. Using the Cesco PUMQ V4 build. Build as Leonardo,...
joseico90's WorkHorse H Quad
joseico90 is a great guy on rcgroups, and I think I'm going to build his new H Quad . I'm hoping he'll have a complete build g...
Turnigy Micro-Quad build, part 2
Continuing from part 1... here's the power cable attached to the bottom of the board. Check the voltage on the power pads, you should s...
Prince of Dubai's Impressive RC Hangar
Literally, a hangar. Jim Smith of 3D Hobby Shop sold him a plane, and as part of the deal was flown over for some lessons and a demo. Fed...
APM: the East Bay Standard Configuration
Here's how I've got my Turnigy 9x / Ardupilot Mega configuration set up. I'm going to call it the "East Bay" configur...
One Minute Guide to DX6i Binding
Here's how to bind a Spektrum DX6i to a receiver. Tx power off Insert bind plug into Rx bind port. Polarity doesn't matter (optiona...
Outdoor Screen Mod -- prototype
I heard Tridge mention in a presentation that they had solved their outdoor PC screen viewing problem by removing the back of their laptop. ...
DSM2/DSMX JR Module, Turnigy 9x Compatible
I've been looking for one of these for quite a while. Spektrum had a JR-compatible DSM2 module , but it was almost $100. But now Hobby...
We're featured in a nice AP Drone article!
A nice article by AP's Marcus Wohlsen went out today. Andreas and I met with him last last week and demoed some of the work we've b...
HobbyKing 9XR Pro Notes
You may have noticed a quick preview on a HobbyKing video a while back about a 9xr that seemed to talk. It turns out that this is going to...
Powered by
Blogger
.
Copyright 2011
Hobby-RC s
is proudly powered by
blogger.com
